PVC Fascia Board White 5m x 150mm
0 suppliers compared
Prices verified daily
Product Details
PVC Fascia Board White 5m is a durable, low-maintenance plastic board designed to cover and protect the exposed ends of roof rafters along the roofline. Its weather-resistant, rot-proof, and easy-to-clean surface makes it ideal for replacing old timber fascias or finishing new roof edges without the need for regular painting. The 5-metre length allows for fewer joints on longer runs, giving a neat, seamless appearance to your home’s exterior. This board is commonly used for roofline upgrades, capping over existing timber fascias, or as part of a complete roof trim system. Alternative names like uPVC Fascia or Roofline Board are often used interchangeably, especially when referring to white, maintenance-free plastic roof trims.
As of June 2026, PriceNailer data confirms that the cheapest price for PVC Fascia Board White 5m x 150mm is £18.00 from Selco across 4 suppliers. Prices have decreased by 3.0% over the last 12 months.
Price History
Frequently Asked Questions
What is the coverage area of a 5m x 150mm PVC fascia board?
A 5m x 150mm PVC fascia board covers 0.75 square metres (5m length × 0.15m width). This single board can cover 5 metres of roofline, reducing the number of joints needed compared to shorter boards.
Can PVC fascia boards be cut to size on site?
Yes, PVC fascia boards can be easily cut to size using a fine-toothed saw or circular saw. Always wear safety equipment and ensure clean, straight cuts for the best finish. The material cuts cleanly without splintering.
Do PVC fascia boards need any maintenance after installation?
PVC fascia boards are virtually maintenance-free once installed. They don't require painting, treating, or sealing like timber alternatives. Simply clean occasionally with soapy water to maintain their appearance.
What fixings are needed for PVC fascia board installation?
Use stainless steel or galvanised screws specifically designed for PVC. Fascia brackets, soffit clips, and joining strips are typically required. Pre-drill holes to prevent cracking and allow for thermal expansion.
Is 150mm width suitable for most UK homes?
Yes, 150mm is a standard width that suits most residential properties in the UK. It provides adequate coverage for typical rafter ends while maintaining proportional appearance. Check your existing fascia height to confirm compatibility.